Description. This work shall conform to Section 250 of the Standard Specifications and consist of repairing disturbed areas. Construction. The Contractor shall seed all disturbed areas within the project limits. Seeding Class 2A shall be used, except in front of properties where the grass will be mowed, then use Seeding, Class 1A. Class 2A shall be used on front slopes and ditch bottoms. Class 4 shall be used behind Type A gutter, on all backslopes and areas behind the backslope, and beyond the toe of front slope on fill sections without ditches. Fertilizer shall be applied to all disturbed areas and incorporated into the seedbed prior to seeding or placement of sod at the rate specified in Sections 250 and 252 of the Standard Specifications. Erosion control blankets must be installed at all disturbed areas and meet with the requirements of Article 1081.10 of the standard Specifications. Any water service boxes in parkway areas to be restored must be adjusted to the proper height prior to seeding. Contractor must contact the owner prior to parkway restoration if a valve box is not adjustable or is broken. If replacement parts are required, contractor shall contact owner for supply of new parts.
