Specifications include, but are not limited to: POWER REVERSIBLE SNOW PLOW: Shall be Bonnell model 12TA3762MXIQA (or comparable Per County Approval) reversing table and A frame, Painted Yellow (L6806EB) to match cab and chassis color. Cutting Edge Holes Cutting Edge Length Standard AASHTO Punch for (2) 6 ft. cutting edges 12 Feet Cutting Edge Material Cutting Edge Bolts 3X FLEX Rubber-Encased Carbide Cutting Edge System 5/8″ GR 8 Counter sunk Cutting swath at 35 degrees 9'9″ Cutting swath at 28 degrees 10'7″ Reversing Cylinder Two - 4″ Dia., 2″ nitrated rods, 12″ stroke Moldboard Material 10 gauge Moldboard Bottom Angle 4″ x 7″ x 3/4″ Carbide Frog Protector Moldboard Ribs 2 (outsides) Seven – 1/2″ x 3″ with the left one doubled (looking at the plow from the back) Level Raise Lift System Springs Chains 8 Flap Minimum height 16″, Anti-Sail Snow Plow Jack Swivel Jack, Top wind, 2,000 lbs. Lift Capacity Center/ground 10” Retracted. 10" Travel, Weld-On Tubular Mount (Bulldog part# TWS158DTSF) A-Frame Shall have gussets behind stops. QA Loop Welded to the lower side of plate.
