Specifications include, but are not limited to: Type: Trailer mounted, high-pressure, water jet type sewer cleaner, to include the following options and accessories: Pump: The style or type shall be the standard as required by the manufacturer but shall meet the following requirements. Component: Make: Model: Describe pump: The pump shall provide a minimum flow and pressure rate of 30 Gallons per Minute @ 3,000 psi. Gallons: @ Psi. The pump shall be a ceramic plunger design, of high torque, driven by a cog-style traction belt, requiring no lubrication to the drive system. There shall be no gearboxes or mechanical couplings to drive the pump. Complies: Yes No Describe pump drive system: The pump housing shall include easily accessible case drains for cold weather storage. Complies: Yes No The pump shall have recirculation capability allowing water to circulate through the pump while the operator retracts the hose for refilling without shut down. Complies: Yes No The pump shall be capable of pumping fresh water, salt water, brackish water, as well as some inert chemicals without damage. The pump shall be capable of withstanding dry operation for a minimal length of time. Complies: Yes No The winterization of the water system shall be accomplished using a 15 gallon storage tank to provide anti-freeze circulation through the entire system. The system shall be plumbed to recapture the anti-freeze and reuse it after use. Complies: Yes No Describe winterization system: Pulsation System: System shall include operator-controlled pulsation function to aid in removing compacted blockage. Complies: Yes No Describe pulsation system: Engine: The power unit shall be a current production, fully enclosed, heavy-duty, liquid cooled, industrial, diesel engine providing a minimum 73 horsepower. It shall be turbo-charged and feature air-to-air cooled after cooling. This engine shall be compliant with all current EPA T4F emission regulations or as outlined for liquid cooled stationary “off-road” diesel engines. Component: Make: Model: Rated H.P.: @ RPM The engine shall be equipped with the following: Keyed electric start Direct reading hour meter Rust resistant Fuel tank clearly marked “Diesel fuel only” Electronic governor and throttle control Automatic shut down for high engine temperature or low oil pressure Gauges and instrumentation to include tachometer, volt meter, oil pressure, and temperature Aluminum or Galvanneal steel Engine enclosure Wireless line of sight remote with the following standards: Engine Start/Stop Water On/Off Emergency Stop Pressure Up/Down Other standard accessories Complies: Yes No If NO, describe: All the above shall be enclosed in a lockable weather-proof enclosure. Complies: Yes No The battery for the engine shall be mounted in a separate enclosure and may be located in one of the tool boxes specified under “Additional Required Accessories”. Complies: Yes No
