Compressor: The compressor shall be rotary screw style with direct drive air-end. Note: This compressor to be capable of operating a minimum of two (2) hammers, rated at 90 Lbs. each for prolonged use. The compressor to have a minimum free air delivery of 250 cfm @ 100psi. The compressor supplied with two (2) 3/4“NPT outlet ports for connection to the specified hose reels. The compressor to have a radiator style oil cooler, dry style air filter, and spin-on type oil filter. The air receiver and oil separator shall conform to A.S.M.E. Code for working pressures required. The compressor oil and engine oil cooling systems shall be adequate for working in 115 degree F conditions continuously. Safety shut-downs shall be provided for low engine oil pressure and if above normal discharge air temperature occurs during operation. Tool lubricator(s) with a combined minimum 1-quart capacity to be provided.
