Specifications include, but are not limited to: Stage Requirements: 1. The stage should be 60’ (wide) x 40’ (deep) x 4’ (height) with two tiered 4’x50’ risers for platform party. 2. The stage should have ADA Compliant ramps and 4’ long Safety Railings for Walkways./Staging. 42” Height from Deck 3. The stage should include audio-video as specified in this contract 4. Staging access staircase units for entering and exiting the stage from the rear of the stage (emergency use only) 5. The stage should have ADA ramps and ADA endplates 6. The stage should have custom-printed skirting, backdrops and trim specified by the University. 7. 2 Split 4’x8’x32’ camera platforms with railing and steps 8. Fabrication and installation of 19-20 gonfalon holders along with the upstage edge of the stage 9. Dark gray or black carpeting for stage and risers 10. Installation of a three-tower self-climbing roof structure, center tower = 60’x30’, side towers = 40’x30’ 11. 20- 6,000 pound ballasts 12. Identify if you are able to provide these requirements to the University, please circle YES or NO. (Mandatory). 13. In your proposal, please provide the specifications of the stage that will be provided for the graduation ceremony. (Desirable) 100 Points; Audio Requirements – These specifications are the minimum Brand Name or equivalent expectations for this next years event but could be adjusted with the awarded vendor in the future to accommodate ceremony size. P.A. system, including 2 main arrays, 2 out fill arrays, front fill, subs and delays. 1. Mains a. 24- L’Acoustics K2 Speaker b. 6 – L’Acoustics Kara Speaker c. 1- L’Acoustics Dual K2 Bump Kit d. 4 – Chainmaste 1 ton double brake 80’ chain motor kit; 2. Out fills a. 24- L’Acoustics K2 Speaker b. 6- L’Acoustics Kara Speaker c. 1- L’Acoustics Dual K2 Bump Kit d. 1- Birdfoot Line Array Tower Kit (Pair); 3. Front fill a. 6-L’Acoutstics Kara Speaker...
