A. General Information: Gwynn Pool was last painted in 2023. Contractor shall power wash the existing pool basin with oscillating power nozzle with 3500 to 4000 PSI to remove loose paint, prep and patch the surface and joints, and seal and paint the surface. Owner will provide the paint and sealer for the project. B. General Scope of Work for Painting Contractor: • The work will begin with power washing of the pool basin. The contractor shall power wash the pool using an oscillating power nozzle 3500–4000 PSI to remove loose paint. • Contractor is responsible for sanding and feathering-out rough edges after loose paint is removed. • Contractor is responsible for final surface preparation to ensure proper adhesion of patching materials and coatings. • Following surface cleaning, the contractor shall perform concrete patching as needed to obtain a smooth paint-able surface. • Once the patching is completed and cured as required by manufacturer’s specifications, the contractor shall proceed with the removal and installation of new caulk in all designated joints, totaling approximately 85 linear feet.
