a. Maintain Floors: All floors, shall be swept, vacuumed, dust mopped, damp mopped, wet mopped, dry buffed, and spray buffed, as needed, to ensure they have a uniform appearance, and free from dirt, debris, dust, scuff marks, heel marks, other stains, discoloration, and other foreign matter. Baseboards, corners, and wall/floor edges shall also be clean. All floor maintenance solutions shall be removed from baseboards, furniture, trash receptacles, etc. Chairs, trash receptacles, and other movable items shall be moved to maintain floors underneath these items. All moved items shall be returned to their original and proper position. b. Remove Trash: All trash containers shall be emptied and returned to their initial location. Boxes, cans, paper placed near a trash receptacle and marked “TRASH” shall be removed. Any obviously soiled or torn plastic trash receptacle liners shall be replaced. The trash shall be deposited in the nearest outside trash collection container. Trash receptacles shall be left clean, free of foreign matter, and free of odors. Recyclable goods deposited in separate containers shall be placed in appropriate central collection receptacles at the facility. c. Clean Interior Glass/Mirrors: Clean all interior glass, including glass doors, partitions, walls, display cases, directory boards, etc. After glass cleaning, there shall be no traces of film, dirt, smudges, water, or other foreign matter. d. Clean Drinking Fountains: Clean and disinfect all polished metal surfaces, including the orifices and drain, as well as exterior surfaces of fountain. Drinking fountains shall be free of streaks, stains, spots, smudges, scale, and other obvious soil. e. Clean Stairways and Elevators: All floor surfaces shall be cleaned as appropriate for floor covering. Grease and grime shall be removed from guards, handrails and baseboards. Contractor shall remove all marks, dirt, smudges, scuffs, and other foreign matter from adjoining walls to provide or maintain a clean, uniform appearance. f. Vacuum and Spot Clean Carpets: Vacuum all carpeted areas. After vacuuming, the carpeted area shall be free of all visible dirt, debris, litter and other foreign matter. Any spots shall be removed by carpet manufacturer’s approved methods as soon as noticed. All tears, burns, and raveling shall be brought to the attention of the Community Development Department. Area and throw rugs are included to receive this service. Spot clean or shampoo dirty carpets over an area of 2 square feet or less. Spots must be removed immediately. g. Vacuum and Clean Floor Mats: Vacuum and clean interior and exterior floor mats. After vacuuming or cleaning, mats shall be free of all visible lint, litter, soil and other foreign matter. Soil and moisture underneath mats shall be removed and mats returned to their normal location. h. General Spot Cleaning: Perform spot cleaning on a continual basis. Spot cleaning includes, but is not limited to removing, or cleaning smudges, fingerprints, marks, streaks, spills, etc. from washable surfaces of all walls, partitions, vents, grillwork, doors, door guards, door handles, push bars, kick plates, light switches, temperature controls, and fixtures. After spot cleaning the surface shall have a clean, uniform appearance free of streaks, spots, and other evidence of soil. i. General Dusting: All horizontal surfaces must be dusted or cleaned to eliminate dust collection.
