Specifications include, but are not limited to: endor shall provide one (1) industrial steam dryer equivalent to the Huebsch model# HT170S. Vendor shall supply one (1) industrial steam dryer equivalent to the Huebsch model# HT170S. Capacity 170 pounds requested. Indicate dryer capacity quoted if a 170 pound capacity dryer has requirements outside of the requirements below. Overall width shall be at least 53 inches Overall Depth shall be at least 69 inches Overall height shall be at least 94.50 inches Cylinder diameter shall be at least 50.8 inches Cylinder depth shall be at least 42.5 inches Cylinder volume shall be at least 49.8 cubic feet Door opening size shall be at least 27 inches Steam inlet ¾ inch, NPT 1 inch outlet NPT Air outlet can be no greater than 12 inches Motor fan and cylinder shall be at least 3.0 HP Airflow shall be at least 2150 cfm with 2450 cfm maximum Electrical requirement is 208 volt, 3 phase Vendor shall install new dryer and remove and dispose of old unit off site after installation. Vendor shall ensure all packing debris and materials are removed from site after installation is complete. For procurements conducted in BidBuy, the State may include in this contract the BidBuy Purchase Order as it contains the agreed Supplies and/or Services.