Specifications include, but are not limited to: The City of Moline (hereinafter: “City” or “Purchaser”) requests proposals on the purchase of one (1) dump body, central hydraulic system, and salt spreader. Body Length 10 Foot overall length x 96” outside width x 84” inside width. Body Capacity 6.2 to 8.3 Cu. Yds. Side Height 24 Inches Front Head Height 34 Inches Tailgate Height 34 Inches All steels used in the construction of body shall have a minimum yield strengths of 45,000 p.s.i. or greater for maximum strength and durability. Sides 7 ga. Side braces 7 ga. Top rail is radius formed and is the same piece (no welded seam) from the top rail down to the bottom rub rail. When looking at the side of the body – there should be no welded seam. Includes one formed horizontal side brace. Tailgate 7 ga.– 6 Panel Front Head 7 ga. Floor AR-450 ¼”. 45 degree floor to side bevel, 12” bevel @ 45 degrees constructed of 1 piece 1/4” AR450 plate. Cargo area Welded continuous. Under-structure Crossmemberless understructure. Longsills of trapezoidal design constructed of 7ga. Longsills are 9” tall - welded continuous. Bottom rub rail to be boxed and welded continuous – no crossmembers. Rear Corner Post 7 ga. 201-2B stainless 10” wide x 5.5” deep.