Specifications include, but are not limited to: Description. Solar Powered Gate Access System shall consist of solar panels on post at each site (6 total) access system, card readers and associated wiring connections for a complete operational system. Materials: Gate Access System (manufacturer listed below or approved equal) with the following features: 1. Single door controller, POE (OpenPath – OP-2ESH-POE) 2. Mullion Smart Reader V2, black, low and high frequency version (Openpath – OP-R2-MULL) 3. Hardware dashboard that monitors each controller and reader, current temperature of reader and lifetime warranty on all hardware. 4. Cloud management system - Remote system management and diagnostics that push firmware updates, remote restart controllers /readers, add / remove users, and change configurations. This shall include the ability to enable / disable key cards remotely, run reports to monitor overall usage and individual user access, schedule locking and unlocking. 5. Universal credential for all locations. 6. Initial 3,500 monthly active users access cards (System must allow for a minimum 10,000 future users) 7. 24/7 Support and end user training 8. See attached Appendix A specifications for additional requirements of the access system. Solar Power System (manufacturer listed below or approved equal) with the following features: 1. KBC Networks remote solar kit with (2) solar arrays – KBC-AL2-200W 2. 21.5”x16”x13” enclosure 3. Batteries – KBC-B12100 (12VDC 100 AH sealed lead acid batteries) 4. POE converter / injector (metal) – KBC-VE-DC / DC-48M 5. Black 16’ steel mounting pole (Videolarm P1600) with anchoring jig (Videolarm PV-4). Cell Modem (manufacture listed below or approved equal) with the following features: 1. Netgear 4G LTE – LB1120-100NAS
