Specifications include, but are not limited to: DHS is seeking a qualified vendor to perform construction services for a storage shed to include the following: Foundation Plates or Sills: Sills should be bolted to existing foundation with not less than ½” diameter x6” length steel bolt embedded into existing concrete, spaced not more than 4ft apart. There should be a minimum of 2 bolts per piece. Foundation plates should be rodent, and weather treated and placed over die cut foam sealer. Wall Framing: Studs in exterior wall shall be no less than 2X6 in size spaced 24” on center and final wall height from top of existing concrete to bottom cord of truss shall be a minimum of 10’. When bearing studs are spaced at 24” intervals, care shall be exercised to ensure centering of roof trusses over studs. Studs shall be placed with wide dimension perpendicular to the wall. Not less than 3 studs shall be installed at each corner of exterior wall. Bearing and exterior wall studs shall be capped with double topped plate installed to provide overlapping at corners and at intersections. Grits will be a minimum of 2x4 size spaced a maximum of 24” on center to receive metal siding.