The Contractor must provide standard lube, oil, and oil filter services and safety inspections as follows: 1. Vehicles, 2007or newer, which requiring synthetic oil (See Attachment B – Payette Vehicle List): a. A detailed safety check every five thousand (5,000) miles or three (3) months, whichever occurs first. b. If, per the manufacturer's recommendations, a vehicle is within five thousand (5,000) miles of a scheduled lube, oil, and oil filter change service, the Contractor must perform the lube, oil, and filter change service and perform the detailed safety check using the Attachment A - Safety and Preventative Maintenance Checklist. c. If, per the manufacturer's recommendations, a vehicle is NOT within five thousand (5,000) miles of a scheduled lube, oil, and oil filter change service, only perform the detailed safety check service using the Safety Inspection and Attachment A - Safety and Preventative Maintenance Checklist. 2. Vehicle maintenance services to be performed on each vehicle per manufacturer standards at the required time must include, but are not limited to: a. Transmission flush; b. Air filter replacement; c. Services included in Attachment A - Safety Inspection and Preventive Maintenance Checklist; and/or d. Other services as needed and approved by the Department.
