Specifications include, but are not limited to: 1. Two-Way, Low Profile, 12' wide, 36" in height, with full trip moldboard. 2. Warranty 100% parts and labor for entire unit bid for a period of one year. 3. Moldboard shall be constructed of 10 gauge A569 steel with a tensile strength of 55,000# - 70,000#. Moldboard is to be roll formed and 100% continuously welded. 4. Moldboard shall have six (6) vertical support ribs which are to be flame cut, 1/2" A36 steel, with a tensile strength of 58,000# - 80,000# equally spaced across the width of the moldboard. Ribs are to taper from 4" at the bottom moldboard angle to 2" at the top moldboard angle. 5. Snow Deflector shall have a 12" rubber snow deflector mounted on upper moldboard. 6. Requirement Cutting edges are not required. ITD will furnish and install cutting edge
