The Forklift must meet the minimum specifications provided in Attachment 1. Specifications, and must be the latest model of the manufacturer's current standard production, as offered to commercial trade. Though they are not specifically covered herein, all parts necessary to provide a complete and functional Forklift must be installed and adjusted prior to delivery Forklift must be full of fuel at time of delivery. All parts must conform in design, strength, quality of materials, and workmanship to current engineering practices and accepted standards of the industry. All parts must be the manufacture's standard unless otherwise specified in this RFQ. Forklift Type - Three-wheel drive forklift, sit-down type with pneumatic tires. Transport Length - Must not exceed 60 in; Weight -5,600 lbs.; Turning Radius- Must not exceed 110 in. and; Width - Must not exceed 102 in. Performance Requirements Rated Capacity - 3,300 lbs. at 24 in. extended load center with stabilizers. 5,500 lbs. at 24 in. retracted load center without stabilizers; Safety Standards - Must meet American National Standards Institute (ANSI) B56.6; Gradeability- 30% loaded and; Speed - 7 MPH unloaded. Engine Type - Tier 4 diesel fueled, water cooled, and rated for capacity of Forklift described; Air Cleaner - dry type and; Oil Filter - Spin-on, throw away type. Transmission Type - Powershift or hydrostatic; Inching Control - Foot operated; Cooler and; Traction - Two (2) or three (3) wheel drive with traction lock. Drive Axle Tires- 31 x 15.5/15 rough terrain type, 8-ply. Steer Axle Type - Hydrostatic drive; Power Steering - Manufacturer's standard and; Tires - 31 x 15.5/15 rough terrain type, 8-ply. Frame Type - One (1) piece welded unitized frame construction. Mast Upright Type - to allow loading and unloading of truck bed from one (1) side; Construction - Telescopic boom or mast with extension mechanism; Forks - 48 in. standard pallet type forks; Tilt - 5 deg. forward, 10 deg. Rearward; Lowered Height - Not to exceed 105 in.; Minimum Fork Height - 130 in. in raised position; Side shift - Hook type on carriage or mast type with load backrest and; Mast Under-clearance - 10 in. Hydraulics Valve - Full feathering type and; Reservoir - With magnetic drain plug and sight gauge. Electrical Type - 12-volt; Battery - 500 cold cranking amp. And; Alternator - Rated for electrical system requirements. Accessories Seat - Deluxe type with seat belt; Back-up Alarm - Electronic audible self-adjusting to ambient noise type; Gauges
