The AccuBrine® Brine Maker System or equal must be a high-performance, fully automated brine production system designed for consistent and reliable production of NaCl brine for anti-icing and deicing operations. This configuration excludes the mixing tank, focusing solely on bulk production of standard brine to support pre-wetting and direct liquid application System Configuration Model Name: AccuBrine® Standard Brine Maker or equal not to include a mixing tank ; System Type: Automated brine production and; Brine Type: Twenty-three point three percent (23.3%) NaCl solution (sodium chloride brine). Production Capacity Brine Production Rate: Up to six thousand (6,000) gallons per hour (GPH); Batch Size: Continuous operation; dependent on salt hopper capacity and water availability and; Storage Capacity: External tanks required for brine storage (not included). System Components Salt Hopper: Capacity: Six to twelve (6–12) tons (customizable); Construction: High-density polyethylene (HDPE) or stainless steel (optional) and; Loading Method: Front-end loader compatible. Dissolving Chamber: High-efficiency water circulation system for rapid brine generation and; Jet agitation for optimal salt dissolution. Control Panel: Fully automated PLC-based control; Touchscreen Human-Machine Interface (HMI) interface; Programmable brine concentration target and; Remote monitoring (optional with cellular or Ethernet connection). Pump and Plumbing: Industrial-grade transfer pump three to five (3–5) horsepower; Piping: Schedule eight (80) Polyvinyl Chloride (PVC) or stainless steel (optional) and; Flow meter and conductivity sensor for automated concentration control. Filtration: Integrated brine filtration to remove sediment and debris. Electrical & Utility Requirements Power Supply: Two hundred thirty (230) volt or four hundred sixty (460) volt, three (3)-phase, sixty 60 Hertz (Hz) (configurable); Water Supply: Two (2) inch or three (3) inch water line; minimum forty (40) Pounds Square Inch (PSI) and; Drainage: Floor drain or dedicated runoff system for overflow and maintenance. Features & Capabilities Automated brine concentration control plus or minus point five (±0.5% accuracy) and; User-defined production cycles. Real-time monitoring of: Salt levels; Brine concentration; Production status...
