The Contractor must provide five (5) sixteen (16 ft) modular office built trailers, new and unused (no demonstrators), from the current model year. The office trailers must meet or exceed the specifications below. The Contractor must include with their bid brochures and specifications of the trailer exterior and interior they are bidding. Trailer Specifications Exterior dimensions must be between 7.5 ft to 8. ft wide, 6 ft to 7 ft high, and 15 ft to 16 ft in length. Enclosed trailer Tandem axles each with a minimum weight rating of 3500 lbs. White Exterior color Curbside exterior door Tongue jack mounted at front of trailer Stabilizer scissor jacks, two (2) mounted at rear, 5,000 lb Spare tire/wheel, radial, with spare tire mount in interior wall, 5 lug Docking Light, LED, Stainless Steel, 12V, pair 18 inch grab handle, mounted at exterior to access door, access door must be mounted on the curbside. Backup camera system, 1 camera, wireless; must connect to a vehicle information system via 7-pin connector Interior Specifications Door/ramp flooring- TPO rubberized material (black) Transition flap- TPO rubberized material (black) Flooring- TPO rubberized material (black) Interior ceiling- screwless aluminum Interior walls- screwless aluminum with Bedrug, brand name or equal, 40 inch high Ceiling insulation 1 inch closed cell R 6.5 or higher Wall insulation 1 inch EPS R 3.0 or higher White interior Electrical specifications Breaker box, 50 amp/120V, 60 amp converter, 12V fuse panel Electrical power inlet motorbase 50 amp with 25 inch black shore cord Interior 120V, 15 amp black receptacle Exterior 120V, 15amp black GFI protected receptacle Battery, lithium, 100AH minimum with manual power cut-off switch
