Physical Specifications: Sheet Size: 8.5” X 11” and; Material Specifications: polyester-based, or equivalent) suitable for up to 6 months’ use in varying Idaho weather conditions, including exposure to snow, rain, Ultraviolet rays, and road grime. Material: Substrate: Synthetic paper such as Teslin SP 10 mil or equivalent and; Optional: Laminated cardstock (minimum 100 lb cover stock). Registration Paper Properties: Thickness: 8-10 MIL (0.008 - 0.010”); Weight: ~100–120 lb bond or 100 lb cover stock; Tear Resistance: ASTM D689 ≥ 200 N; Water Resistance: No delamination after 24-hour submersion; Temperature Resistance: −20 °F to +180 °F; UV Resistance: <10% fading after 90 days sunlight; Print Compatibility: Laser printer; toner fusion ≥ 300 °F; Finish: Matte or semi-gloss and; Optical Brightness: ≥ 90%. Perforation: Horizontal perforation to detach vehicle registration section (location: top or bottom) Mounting Holes: Four (4) pre-punched or die-cut Spacing: Horizontal: 7.00 in ± 0.03 in and; Vertical: 4.75 in ± 0.03 in. Hole Diameter: 0.28 in ± 0.02 in. Print Requirements: Must be compatible with laser printers and/or inkjet printers used by county assessor offices and the ITD Print Shop; Specifically, compatibility with common brands/models (e.g., HP Laser Jet, Epson, etc.); Provide recommended print settings and handling instructions; High Contrast black on white preferred and; Minimum resolution: 300 dpi. Mounting and Display: Attachment Methods: Mounting holes must align with standard license plate frames; Optional plastic cover or sleeve and; Prohibited taping, laminating, cutting, or resizing. Visibility: Must not obstruct any key data (plate number, state name, expiration date, or barcode) and; Legible from 50 feet in daylight.
