Specifications include, but are not limited to: Table Size: 9” x 42” (230 x 1067 mm) T-Slot Width 5/8” x 3 (on 2.5” centers) Load Capacity 400 pounds Machine Travels & Capacity: Table Travel - Longitudinal – X Axis: 30” (762mm) TableTravel with Power Feed: 27” Cross Travel – Y Axis: 12” (305mm) Knee Travel- Z Axis: 16” (406mm) Spindle Nose to Table Surface: 0”-18.5” (0mm-469mm) Quill Travel Manual and Power Feed: 5” (127mm) Quill Feeds – with trip release: 0.0015”, 0.003”, 0.006” (0.038mm, 0.076mm, 0.152mm) Quill Diameter: 3 3/8” (85.725mm) Leadscrews with ground pitch surface: 0.200” per rev. Adjustable scale ring display resolution: 0.001” (5mm) Ways – X, Y, & Z Axis: Hardened & Ground Dovetail Ways Spindle Head: Spindle Motor: 3-HP, 3-Phase 208-240 vac Spidle Taper: R-8 Spindle Runout: 0.00008” maximum runout (0.002mm) Spindle Bearings: Class-7 bearings Variable Speed Spindle: 60-4500 rpm Head Tilt (left to right) 90° -0 - 90° Head Tilt (front to back/ up-down) 45° - 0 - -38° Head Swivel on Turret 360° Chip Tray Work Light Built-in Coolant Pump Inspection Report on Accuracy, Instruction Manual, Tools and Tool Box Installed Options: 4,500 RPM 3-HP Inverter Drive Spindle Hi-Torque Cross Powerfeed Powerpac Air Power Drawbar Push Button Quill Stop Tooling Options: Jacobs Drill Chuck w/ R-8 Arbor (1/2’ Capacity) Lyndex R-8 Collet Set, 11 Piece Set (Sizes 1/8” – ¾” x 16ths) Collet Holder for 11 Piece Set Work Holding Options: KURT 6” D-688 Mill Vice (8.8” Opening) 58 Piece Clamping Set (Containing 24 studs- 4 each: 3,4,5,6,7 & 8 inch long, 4 Coupling kits, 6 Flange nuts, 6 T-Slot nuts, 6 Forged Step Clamps, 6 Step blocks, 1 wall rack) Delivery
