Specifications include, but are not limited to: The CONTRACTOR shall regularly and systematically examine, adjust, lubricate, and, if conditions warrant, repair or replace to original specifications, the following: 2.9.1. Machine: Including worn, gear, thrust bearings, drive sheave, sheave shaft bearings, brake coil, brake linings, and components. 2.9.2. Elevator Pump Unit: Including pump, V-belts, strainers, silencers, springs and gaskets. 2.9.3. Motor Generator: Including windings, bearings, rotating element, commutators, brushes and brush holders.2.9.4. Jack Unit: Including guide bearing, packing and packing gland. 2.9.5. Controller: Including relays, resistors, contacts, coils, leads, transformers, fuses, timing devices and solid state components. 2.9.6. Valves: Including relief valve, pilot, lowering, leveling and checking valves; or any of the parts thereof. 2.9.7. Dispatching Equipment: Including relays, resistors, contacts, coils, leads, fuses, transformers and solid state components. 2.9.8. Selector: Including electrical or mechanical drive components, cam contacts, relays, resistors, leads, transformers and solid state components