1. Model: New, current production year or later. 2. Typе: Crew Cab, 2WD, DRW 3. GVWR: 13,400 lb. minimum and 18,000 lb. maximum. 4. Payload Capacity: Minimum 9,300 lb. 5. Engine: Gasoline fueled, 7.0 L. 6. Flat Bed: 108" Length or as close to this dimension as weight distribution will allow. Floor: 10-gauge smooth steel. Width: 96" or as required to align with sidewall of outer tires. Stake Pockets: Punched on left side only. No stakes required. Headboard: Full width 10-gauge smooth steel with manufacturer's standard rear-view portals. 42" height or as needed to match top of cab height. Sidepack: (right side only) 108" 3 compartment sidepack mounted on right side of flatbed. 20"-22" compartment depth, Knapheide 600, Reading Type A or approved substitute series with three (3) compartments. 45"-46" sidepack height. Each compartment to be supplied with compartment drain and plug. 3/8" rubber mats shall be placed on the bottom of all compartments. Drip rails shall be located over all door openings and run the full length of the body. All compartments shall utilize stainless steel fasteners. Exposed door hinges shall be of type 304 stainless steel and fastened with type 304 stainless steel fasteners.