A. Make/Model 1. Lycian 1295-ELT or approved substitute B. Frame/Mount 1. The unit frame and enclosure shall be constructed of cold rolled steel and sturdy aluminum extrusions, free of burrs and protected by a gray and black powder coat finish. 2. The unit may be manufactured from interchangeable lens modules and delivered pre-configured as long as unit can meet the requirements of 3 degree to 7 degree beam spread and stand requirements. The unit may be ordered with medium or long throw lens modules. 3. The unit shall be mounted on a stable, three-legged tripod stand or folding fourlegged stand with adjustable yoke mounts. If unit has casters, bases shall include locking casters and leveling jacks for each leg. 4. Mounting shall incorporate the following design features: i. Unobstructed access ii. Easy height adjustments iii. Horizontal pan knob and vertical tilt control levers 5. Mounting shall incorporate low friction materials to allow for smooth pan and tilt operation. 6. The exterior body or stand must contain rigging points or eye-bolts to secure unit to safety points. These points must be able to bear the full weight of the followspot.
