Specifications include, but are not limited to: The vehicle shall be equipped with a one-piece 10” high bumper made from 10 gauge (0.135” nominal) polished stainless. It shall be mounted directly to the front frame extensions and shall incorporate two (2) stiffening ribs. The bumper shall be extended approximately 18” to 20” from the face of the cab as required. The extended front bumper gravel shield shall be made of 3/16” (.375”) aluminum tread plate material. The center bumper tray shall have a diamond plate lid. The lid shall be hinged and include a D-Ring latch, rubber seal and held open with a pneumatic shock. A hose tray constructed of 1/8” aluminum shall be recessed into the front bumper extension. The tray shall be located in the center of the bumper and have a capacity of 150' of 1.75" DJ hose. The center bumper tray floor shall be covered with a heavy duty Black floor matting.