Specifications include, but are not limited to: One (1) Cab and Chassis w/Front Loading Refuse Collection Body. The body to be provided should be equal to or better than a 33 - 34 yard Mammoth, Wittke or equal brands. These specifications describe a hydraulically actuated partial pack Front Loader with a container hoisting device capable of handling 1 – 12 Cubic Yard Container with side pockets. The body shall be capable of compacting and transporting refuse to a landfill or transfer station and discharging the load by means of hydraulically ejecting the load from the body. All equipment furnished under this contact shall be new, unused and the manufacturer’s current production model. Accessories not specifically mentioned herein, but necessary to furnish complete unit ready for use, shall also be included. Unit shall conform to the best practice known to the body trade design, quality of material and inter-changeable throughout the entire quantity of units as specified in this invitation to bid. The equipment furnished shall conform to ANSI Safety Standards Z245.1-2007. CAPACITY 1. The Partial Pack Front Loader Body shall have a minimum 34 cubic yard capacity, including the receiving hopper. The body and the hopper should be a maximum of 35 cubic yards. 2. The hopper should have a capacity of twelve (12) cubic yards. CONSTRUCTION: 1. Packer Body will have flat hopper and body floor with curved roof and body sides and of overhead loading design. Hopper will be designed to properly handle containers from 1 - 12 cubic yard capacity. SIDE WALLS: 1. Lower Hopper sides: minimum 3/16" RQC 321 abrasion resistant steel plate, 150,000 PSI minimum yield. 2. Upper Hopper sides: minimum 12 gauge high tensile steel sheet 80,000 PSI minimum yield. 3. Body Sides: minimum 10 gauge high tensile steel sheet, 80,000 PSI minimum yield.