Specifications include, but are not limited to: Component 1: Removal of 65 existing cameras 1.1. 27 of the cameras being removed are not being replaced. For those, removal will also include the identification of the cabling to them, termination with a biscuit block jack if not already in place, and labelling. A listing of those jacks will be provided by the vendor to CSD IS staff as part of the close out documentation. 1.2. For the remaining 38 cameras, they will be replaced with a new camera as detailed below. Once removed, the cables for them should be tested, have a biscuit block jack installed if not already in place, and be labelled. A listing of those jacks will also be provided by the vendor to CSD IS staff as part of the close out documentation. 1.3. Once removed, the cameras will be moved by the vendor to an off-site storage location designated by CSD staff. They may be stored on site temporarily so they can all be moved at one time to the off-site facility.