Specifications include, but are not limited to: A. Equipment offered must meet the minimum specifications of the International Model and include the following: 1. Cab Type: Unit shall be a conventional cab with one-piece tilting hood and front fender assembly. 2. Cab to Axle: 155 inches. 3. Wheelbase: Manufacturer's standard for 144 inch cab-to-axle. 4. GVWR: 66,000 lbs. 5. Frame: Frame shall be a 120,000 PSI steel. 6. Front Axle: Front axle shall be a 20,000 lbs. set back axle with 20,000 lbs. suspension. Unit shall be equipped with a wet type wheel bearing and oil seals. 7. Rear Axles: Unit shall be equipped with a 46,000 lbs. tandem axle Meritor or approved equal. Unit shall be equipped with a 46,000 lbs. suspension. Equipped with a Hendrickson RS-460 with additional rubber load cushion. Equipped with a driver controlled inter axle differential lock-out. 8. Rear Axle Ratio: Unit shall allow road speeds of 65 to 70 MPH. approx. Specify exact ratio and furnish a performance chart. 9. Tires: Tires shall be as follows: a. Front - 425/65R 22.5 J (20 ply) radials, highway tread. b. Rear - 11R 22.5 H (16 ply) radials traction tread. 10. Wheels: Unit shall be equipped with 10 hole steel disc wheels I.S.O. hub pilot mount painted white. 11. Spare: Not required.