Specifications include, but are not limited to: The scope of work is to include the following and include the cost of any additional equipment necessary to perform and complete the replacement. In addition, include the cost if any landscaping restoration of area. A.Remove all existing material (downspouts, gutter, drip edge, etc.) and dispose of properly B.Replacement of wood fascia, trim behind gutter area and additional areas around facility. C.Furnish and install approximately 452 LF of new 6" box gutter: a.Preferred 24-Gauge steel with Kynar finish b.Color to be chosen by the Owner D.Furnish and Install approximately 380 LF: a.New TPO Coated Metal Drip Edge b.New TPO 60-mil membrane to flash it in at TPO roof section E.Furnish and Install approximately 72 LF: a.New drip edge and strip it accordingly at modified bitumen roof section b.Preferred 24-Gauge steel with Kynar finish c.Color to be chosen by the Owner F.Furnish and Install approximately 130 LF:a.New Downspouts with elbows at the bottom end at all existing locations around the building. b.Preferred 24-Gauge steel with Kynar finish c.Color to be chosen by the OwnerG.Daily cleanup and securing material and equipment at worksite H.Site to be left neat and clean of roof all debris.