Specifications include, but are not limited to: - The property shall be serviced biweekly unless otherwise agreed to by both parties. - See attached exhibit (Exhibit A – Site Boundaries) for site boundaries and project scope. - Mow all turf areas to industry standard grass heights according to turf type. Bi-weekly service schedule. - Maintain entire grounds within site fence, a boundary of 6 feet in width outside of all fence lines. - Edge around all structures, fences, tanks, and basins in addition to all areas where turf meets curb, hardscape or sidewalk. - Weed-eat all areas where turf meets landscape mulch/straw bed and trim around signs, posts, etc. - Apply pine straw twice per year in all existing pine straw beds and tree rings. - Trim all shrubs monthly and trees as needed. Trees branches shall not encroach or touch perimeter or interior fencing. - Remove all dead or hazardous tree limbs from existing trees on-site. All debris to be removed and disposed of off-site by the contractor. - Maintain fences to remove and prohibit growth of vines or weeds. - Use environmentally acceptable herbicides to control and kill weeds in hardscape, mulch, or pine straw or flower bed areas. Ensure no chemicals are sprayed near or around stormwater structures so as to prevent runoff into local waterways. - Herbicides should be utilized in addition to hand weeding to remove and prohibit weed growth in parking lot asphalt and curbing, all walkways, and parking blocks at administration building. - Herbicides should be routinely sprayed in all gravel parking and laydown areas.
