Specifications include, but are not limited to: University of Georgia is issuing this Request for Quote (RFQ) to accept bids for an Orchard Pruning Tower, per the attached Bid Specifications Specifications: 1. The boom for the lift must be twenty‐five feet (25’) in length. The total height will be thirty‐five feet (35’) including the base. 2. The lift must have dual speed drive that is selectable from the cockpit with the boom in either the up or down position. 3. The lift must have dual‐outlet hydraulic tool ports that are located on or near the outside of the operator bucket. 4. The lift must be highway towable with an incorporated tongue hookup and quick disconnect drive wheels. 5. The wheels must be hydraulically retractable and result in a maximum width of ten feet (10’) for the unit when retracted. 6. The lift must have joystick steering and a foot pedal for raising and lowering the unit. 7. The cockpit area must be enclosed on all sides of bucket with minimum of three feet (3’) to a maximum of four feet (4’) high walls and a safety latch on the door.