1. Interactive Panel 75" with Balance Box Mount & Installation Inputs - (2) HDMI, (1) Display Port, (3) VGA Outputs - (1) VGA, (1) 3.5mm headphone jack Must have built in audio mixer for seamless integration of microphone solution 10 points of touch with capability of supporting up to 32 points of touch PC less operation Dual USB outputs to support touch of two devices (i.e. PC and collaboration device) (3) 15W speakers built in for classroom audio Panel must support over the air (OTA) firmware updates 5 year onsite warranty required All cabling residing above ceiling must be plenum rated Cabling should allow for the following signals to be transmitted - HDMI x 1, USB for touch operation x 1 Cabling from input plate to source must be a minimum of 50' in length Input plate must contain the following connections - HDMI, USB Input panel locations will be determined on an individual room basis Input panel must be either flush mounted or housed in an enclosure box Balance Box 400-90 - Weight capacity up to 198 pounds, Travel range of 15.75 inches
