Specifications include, but are not limited to:
Furnish all labor, materials, equipment, generators plus incidentals required and perform the work in its
entirety as specified herein. The Work includes, but is not necessarily limited to, the following:
Demolition of sections of existing concrete to provide adequate area for installation of new engineered concrete
pads for the new power generators.
Installation of 26 new Engineer designed concrete pads, 26 new stationary diesel powered stand by emergency
power generators with automatic transfer switches, required service disconnects, conduits, fittings, wiring, cabling,
appurtenances, grading and sod as required.
Installation of new conduits, fittings, wiring for connection of new generators to existing equipment.
It is required that any damage caused by the contractor or subcontractors to the existing facilities (fence, pipe,
security systems, cameras, poles, etc.) will be repaired or replaced at the Contractor’s expense.
Electrical modifications to existing panels and disconnects required for generator connections.
The instrumentation and controls work includes: Electrical Engineering services for circuit design, wire and
conduit layout. Add in programming to existing Motorola ACE 3600 PLCs, Wonderware controls and interface for
Provide survey services for each easement, lot or property and submit survey documents to the Owner for
Perform all work required to comply with all applicable permits, codes, regulations, and laws.
1.1 Mobilization / Demobilization
1.2 Easement / Property Surveys and Permits
1.3 General Conditions (Bonds, Warranties, Insurance and Indemnification)
1.4 Engineering and Professional Services
1.5 Miscellaneous Completion items (Record Drawings / O&Ms / Test Reports)
2.1 Demolition, Grubbing, Site Preparation, Erosion Control, Earthwork
2.2 Concrete Pads, Grading, Loaming & Seeding
3.1 Storage, Handling, Rigging and Equipment
3.2 Field Assembling, Anchoring, Fabrication
4.1 Boxes, Raceways, Conduit and Condulets
4.2 Wire, Cable and Terminals
4.3 Installations, Panel Modifications and Testing
5.1 Programming & Implementation
5.2 Controls Testing and Documentation