Specifications include, but are not limited to: The Florida Fish and Wildlife Conservation Commission, Division of Law Enforcement, Boating and Waterways Section (Commission) is seeking bids for the production of Uniform Waterway Marker Buoys. Buoys will be ordered on an as needed basis. See Technical Specifications. All buoys must comply with the United States Coast Guard (U.S. Aids to Navigation System) requirements and meet or exceed the requirements of Title 33, Code of Federal Regulations. All materials utilized will withstand the elements under outdoor conditions from fading or peeling for a period of at least three (3) years. Vendor will supply the Commission with layout renderings of the buoys prior to final production, and certification that materials meet or exceed the aforementioned specifications. With the exception of the standard stainless steel mooring eye, bid does not include hardware associated with installation such as clevis, cable or chain. Wording will be centered over the geometric symbol and within remaining white panel space and appear on two sides, however, letter height will vary based on amount of wording. 9” Diameter Standard White Can Buoy (Internal Ballast) - 61” in height, visibility of at least 36” equipped with stainless steel swivel eye (bottom-eye), 3” wide reflective high intensity orange band around top and bottom of buoy, reflective symbols, recess cap design molded from UV inhibitors, chemically resistant, ABS exterior (or equivalent), completely urethane foam filled, and self-righting without tackle, stainless steel anchoring eye cast in internal concrete ballast, stainless steel pickup eye built in top. 14” Diameter (Large) White Float Collar Can Buoy (Internal Ballast)- 28” collar, suitable for deep water applications with a visibility of at least 36” with stainless steel swivel eye (Bottom-eye), 3” wide reflective high intensity orange band around top and bottom of buoy, recessed cap design molded from UV inhibitors, chemically resistant, ABS exterior (or equivalent), completely urethane foam filled, and self-righting without tackle, stainless steel anchoring eye cast in internal concrete ballast, stainless steel pickup eye built in top. 14” Diameter (Large) White Float Collar Fast Water Can Buoy (Internal Ballast)- 28” collar, suitable for shallow water, fast water applications with a visibility of at least 36” with stainless steel swivel eye (Side-eye), 3” wide reflective high intensity orange band around top and bottom of buoy, recess cap design molded from UV inhibitors, chemically resistant, ABS exterior (or equivalent), completely urethane foam filled, and self-righting without tackle, stainless steel anchoring eye cast in internal concrete ballast, stainless steel pickup eye built in top. 19” Diameter (Large) White Float Collar White Can Buoy (Internal Ballast)- 38” Collar, with at least 36” visibility equipped with stainless steel swivel eye (Bottom or Side-eye), 3” wide reflective high intensity orange band around top and bottom of buoy, rounded float to discourage debris collection, recess cap design molded from UV inhibitors, chemically resistant, ABS exterior (or equivalent), completely urethane foam filled, and self-righting without tackle, stainless steel anchoring eye cast in internal concrete ballast, stainless steel pickup eye built in top.