SPECIFICATIONS FOR DUMP BODY CONSTRUCTION 2.1 11-Foot-Long Fold-Down or Drop-Down Sides, with minimum side height of 12”, Steel. 2.2 Inside Dimension-Length of 135” and Inside Dimension-Width of 86.9” 2.3 Outside Dimension-Length of 138” and Outside Dimension-Width of 95.88” 2.4 Dump Body Tapered Quarter Cab Protector, Black. 2.5 Plate Hitch Ford 2” or 2-1/2” Receiver. 2.6 RV OEM-Style 7-Way Socket 2.7 Chassis Trailer Pigtail Extension Kit, Ford. 2.8 Pull Style Spring Return Tarp Aluminum or Steel System-Mesh. 2.9 Sides and Tailgate Feature Self-Cleaning Sloped Top Rails and Lower Rails. 2.10 Sides Constructed of 12-Gauge High Tensile Steel. 2.11 2”x6” Sideboard Pockets on the Sides at the Front and Rear Allow Increased Load Capacity. 2.12 Versatile, Double Acting Tailgate in Order to Accommodate both Dropdown and Pickup Style and Spreader Applications. 2.13 Quick Release, One-Handed Lever for Easy Drop-Down Action on the Tailgate. 2.14 Toe Saver Brackets Located on Both Sides of the End Rail for Operator Safety. 2.15 Rear Corner Posts Equipped with a Hook on each side. 2.16 Tarp Double Panel Tailgate Construction with 12-Gauge HY50 Outer Panel and 10-Gauge HY50 Inner Panel. 2.17 Crossmemberless Models shall Feature Fully Boxed Long Sills Constructed of 7-Gauge HRCQ Steel and Run the Length of the Floor. 2.18 Crossmemberless Models shall Feature a Two-Piece 7-Gauge HRCQ Steel Floor with Full Seam Weld Down the Center. 2.19 Electrodeposition Prime Painted Bodies shall be Fully Protected with Water-Based Undercoat and/or Oven-Cured Black Paint. 2.20 Electric Double Acting Subframe Hoist for 11’ Dump Bodies. 2.21 Shear Plate of 13”...
