Specifications include, but are not limited to: Remove and dispose of existing sliding gate. 2.1.2. Furnish and install the following 1. One (1) Galvanized chain link cantilever slide gate with heavy duty commercial rollers. 2. One (1) Hy-security 222 gate operator with mounting deck 3. One (1) Set of photo eyes 4. One (1) Safety edge 5. One (1) Entry loop detector 6. One (1) Free exit loop 7. One (1) Click2Enter controlled access device for fire/police access. 8. One (1) Direct burial heavy duty gooseneck pedestal with (1) RBH access control proximity reader located at the exterior of the gate at least six (6) feet away from the gate operator. Height and location to be selected by Public Transportation. 9. Two (2) Warning placards; one (1) placed on each side of the gate. 2.1.3 Provide electrical and network services including all material, labor, equipment, asphalt repair, and permits needed for the RBH access-controlled sliding gate to be complete and fully functioning.
