Specifications include, but are not limited to: The Hillsborough County Parks and Recreation Department (PRD) seeks a qualified Supplier to provide and deliver Transit Benches for its Parks, Recreational sites, and playgrounds. PRIDE Part #14167704PLA 6’ surface mount Transit bench with Cedar color 2 x 4 recycled plastic Slats; Dimensions: 21” W x 31” tall x 6’ long; Weight: 220.00 lbs. Description: 6’ Surface mount transit bench with armrest. Made with 3 Aluminum surface mount Frames (with or without armrests and 9- 2 x 4 x 6’ (1-1/2” x 3-1/2” x 6’) cedar color 100% Recycled (High Density Poly Ethylene) plastic slats. Slats are bolted horizontally to (3) 1 piece welded aluminum surface mount frames. Slats are bolted to leg frames with 5/16” x 3-1/2” hot dip galvanized carriage bolt, nut and washer. Frames are 1 piece welded aluminum frame consisting of 2” OD Aluminum pipe legs with ½” x 3” flat bar (contour shaped seat and backrest with (9) 9/16” bolt holes) welded to 1/2” x 3” Surface mount aluminum flat bar feet with (2) 9/16” dia. bolt holes for surface mounting. Frames are welded in one piece construction. Supplied With or without Armrests; Recycled plastic is 100% post-Consumer High Density Polyethylene (HDPE). Standard color is Cedar; Benches are shipped fully assembled. PRIDE Part #14167705PSTA 8’ surface mount Transit bench with Chestnut brown color 2 x 4 recycled plastic Slats; Dimensions: 21” W x 31” tall x 8’ long; Weight: 275.00 lbs. Description: 8’ Surface mount transit bench with armrests. Made with 3 Aluminum surface mount Frames with armrests and 9- 2 x 4 x 6’ (1-1/2” x 3-1/2” x 8’) chestnut brown color 100% Recycled (High Density Poly Ethylene) plastic slats. Slats are bolted horizontally to (3) 1 piece welded aluminum surface mount frames. Slats are bolted to leg frames with 5/16” x 3-1/2” hot dip galvanized carriage bolt, nut and washer. Frames are 1 piece welded aluminum frame consisting of 2” OD Aluminum pipe legs with ½” x 3” flat bar contour shaped seat and backrest with ((9) 9/16” bolt holes) welded to 1/2” x 3” Surface mount aluminum flat bar feet with (2) 9/16” dia. bolt holes for surface mounting. Frames are welded in one piece construction. Frames are supplied with armrests that measure 3/16” thick x 1-1/2” wide x 24” long wide and bent to connect to back rest and bench seat portion of the frame.. Armrests are reinforced with additional aluminum to deter vandalism. Each frame component will have an armrest. Recycled plastic is 100% post-Consumer High Density Polyethylene (HDPE). Benches are shipped fully assembled. Anchored with 9/16” red head concrete anchors that are to be provided by the installer.
