Specifications include, but are not limited to: New current production tire changer with pneumatic wheel lift. The unit to be HUNTER MODEL TC37SSW, in accordance with the following salient characteristics: TIRE LIFT: Wheel/tire lift for loading and unloading wheel/tire on and off tire changer turntable. Range of the lift from the floor to the turntable. The lift shall be designed as to allow wheel/tire to be rolled from the floor on lift platform and in raised position to set wheel/tire on turntable requiring no physical lifting by technician for installing or removing wheel/tire from the tire machine. TURNTABLE: Shall be bi-directional 360 degrees rotation with a minimum speed of 14 rpm. The turntable shall be powered by 220V 1Ph electric. RIM CLAMP: Automatic rim clamping system with adjustable moveable rear column with a capability of handling various size rims and tires up to 46- inch diameter for flexibility in applications. Rims clamp should be able to adjust to different work heights. BEAD BREAKER: Bead breaker must be able to be operated in an upright position. Unit should have bead roller system to safely remove stubborn tire beads bead press arm to assist with installation of difficult assemblies. Unit shall have integrated bead blaster for bead seating. Tilted ergonomic designs for technician’s safety required. ADAPTERS & ACCESSORIES: Storage tray, lube applicator and bottle, tool holders, 20-2341-1 19.5” adaptor kit. TRAINING: The successful vendor shall provide a minimum of two (2) hours of training. WARRANTY: The successful vendor shall provide the name, location, and phone number of the nearest factory authorized representative who will provide service for the duration of the warranty period.