Please note: This is a Sole Source Notification. Provide new facility access control hardware, security cameras and intrusion detection system to function in accordance with laboratory biosafety level 3 containment protocol. Existing doors shall be operated through access hardware, 600 lb. magnetic locks, 12/24 VDC 6AH power supply, request to exit motion sensors/ buttons, modular surge protection, HID proximity pro card reader, mercury door controllers, network control panel and be programmed with sequence interlock. Intrusion detection system to include control center, 4 zone/ proximity touchscreen keypad, zone expander, plug-in output relay digital cell communicator, single door contacts, cabling and conduit. IP camera system to include 12TB hard drive kit, 16 port POE+ switch gigabit 246 watts cameras 5MP In/Outdoor mini dome 2.8mm IR cameras 8MP In/Outdoor 180 w/ IR, 43” monitor 1920 x 1080 resolution, wall mounts, cabling and conduit. Furnish and install physical hardware, equipment, cabling, connections, software, programming and integration of new security system with existing campus security network. Provide plans, drawings, submittals, permitting, systems training and equipment necessary to facilitate installation as required. Intended Single Source: Redwire
