Interior Pool Finish A. All exposed interior pool surfaces and all other noted surfaces shall be finished with the specified pool finish except where ceramic tile is called for. Epoxy's caulk or fillers will not be acceptable. B. Applicator: All applications of plaster finish will be done with an in-house contractor. Plasterer will have a minimum of three (3) years' experience in the application of this type of finish, as approved hy the Department of Public Works. C. Materials: pre-mix: Interior finish shall he a manufactured pre-mixed material applied in strict accordance with the manufacturer's printed instructions in the submittals. D. All water used will be potable. A.General 1. Furnish and install 6" x 6-3/4" BN glazed ceramic tile for waterline and riser. Tile will he set into a solid hacking and will have no voids behind tile prior to the plaster finish being installed. All tile installed will be true and level set with either a water level or a laser. 2. All depth markers to be replaced with approved depth markers as noted in Chapter ME-9 of the Florida Administrative Code for placement and size. 3. All "No Diving" marker sets in the top of the riser beam will be the approved size. baked in non-skid ceramic tile. Set flush in the beam to provide a smooth surface. 4. Specification for tile setting can be found from the following: American National Standard Institute (ANSI) A I 08.1-1976 Ceramic Tile Installed with Portland Cement Mortar. The Tile Council of America, Inc., TCA 137. I Standard specification for Ceramic Tile Installation...
