Specifications include, but are not limited to: 1. All upper and lower cabinetry to be commercial rated. 2. Typical 5/8” plywood construction is acceptable for the sides and backing having all exposed surfaces covered with laminate, including toe kicks, interior and interior shelving. Particle board & melamine are not acceptable products for this bid. 3. Cabinet doors and drawer facing will be 3/4” plywood having high pressure plastic laminate with 3mm PVC edging from the following manufacturers: Formica, Nevamar, Panolam, Wilsonart or Pionite 4. The cabinet and drawers shall be equipped with heavy duty commercial rated soft close hinges and drawer closures. 5. The awarded firm shall supply the County with all product submittals and color samples for approval before any items are ordered. 6. Cabinetry should be properly secured to the floor and walls, adding additional supports and backing if necessary. 7. The countertops should be fabricated to be seamless. If seams are necessary – they should be beveled in such a manner as to ensure a smooth transition to the connecting piece. 8. Removal and replacement of the kitchen sink to be a drop in single bowl basin stainless steel sink measuring no less than 30-33” across 16” wide and minimum 10” deep. 9. Removal and replacement of the existing faucet to be a commercial rated single handle faucet with spray options. Finish to be approved by the County. 10. The awarded firm shall be responsible for the disconnection, removal and reinstallation of all appliances and fixtures, including but not limited to; dishwasher, water heater, sink, disposal, drains, and electrical and plumbing lines. All work to be completed to the satisfaction of the County...