Specifications include, but are not limited to: The specifications within Attachment B, represent the basic design.The anti-ligature beds must be of equal or higher quality and functionally equivalently. Products shall equal or exceed the quality level of industry standard and shall comply with all applicable federal, state, and local technical, environmental and performance standards. 6.2 Anti-Ligature beds must be molded, one-piece reduced ligature design made with durable polyethylene construction with rounded corners. Anti-microbial with a high chemical resistance. 6.3 Anti-Ligature beds should have smooth sides with a lip around mattress. 6.4 Anti-Ligature beds me be cleanable with high chemical resistance. 6.5 Anti-Ligature beds must meet or exceed Fire retardant to CAL 133 and UL 94 HB, Tested to ANSI/BIFMA X5:5:2012 standards, FIRA international standard 059:2014 Contract Beds, and UV resistance tested to UV21+. 6.6 Anti-Ligature bed size and weight 6.6.1 Minimum dimensions: 18.9 “H, 82.7 W, 39.8” D with mattress tray to accommodate a mattress 78” x 36 in diameter. 6.6.2 Industry standard weight, foam filled. 6.6.3 Static load tested to 1100 lbs. 6.7 Anti-Ligature beds should be free-standing or optional floor fixed, if floor fixed the floor fixing kit must be included at no charge. 6.8 Anti-Ligature beds must be flush with existing wall or infills must be made available. 6.9 Anti-Ligature beds should have at least 3 different color options available 6.10 All anti-ligature beds will be shipped, assembled and ready to use.
