Specifications include, but are not limited to: - A glovebox system mounted along one wall of the body (street side) ; - A stainless-steel covered workbench with draw and cabinet storage below and a vent hood and cabinet above for set up and calibration of handheld meters to be deployed. (curb side) ; - A computer workstation with desk top computer, twin screens and printer/scanner/fax machine mounted and secured. (front body); - A diesel generator that will operate off the trucks fuel system to provide power.; 10.1 CAB AND CHASSIS SPECIFICATIONS The chassis shall have a vehicle identification number that reflects a 2022 model year or newer.; The chassis will meet applicable U.S.A. federal motor vehicle safety standards per CFR Title 49 Chapter V Part 571 as clarified in the incomplete vehicle book per CFR Title 49 Chapter V Part 568 Section 4 which accompanies each chassis. ; 10.2 AXLE CONFIGURATION – 4X4 The chassis shall feature a Four-Wheel Drive capable axle configuration consisting of a single rear “drive axle” with a single front steer axle with drive capabilities.; 10.3 CAB STYLE The cab shall be a two-door cab. This cab shall have seating for two (2) with a switch console between the seats.; 10.5 CAB SIDE WINDOW VENT VISORS Each cab side window shall have a vent visor installed above the window that will allow the window to be opened a few inches during rain or snow for ventilation and prevent water from entering the cab.
