Specifications include, but are not limited to: 1) Full demolition a) Remove all existing plumbing fixtures and temporarily cap plumbing lines b) Remove all partitions, mirrors, grab bars, soap & toilet paper dispensers, plastic access panels, baby changing stations, and countertops c) Remove recessed paper towel and trash receptacle. d) Remove existing light fixture, frame alcove, drywall to finish ceiling e) Remove all sheetrock down to studs on walls. Ceilings to remain intact f) Remove tile VCT and Ceramic floor, and transition down to slab 2) Restoration a) Frame in recessed paper/trash fixtures b) Replace all sheetrock on walls using 5/8 “green board” c) Install new wall tile up to 6’ AFF, using “running bond” pattern d) Install Schluter material for transition from tile to painted wall and all other tile terminations (Including outside corners of walls) e) Install new floor tile using “Running Bond” pattern, and transition. f) Patch, sand, prime and paint ceiling, flat white g) Sand prime and paint AC grilles and reinstall h) Prime and Paint walls above tile i) Install new light fixture, switch, and additional electrical wiring j) Prime and paint door frame k) Install new shut off valves, supply, drain lines and fixtures l) Install grab bars per ADA specifications m) Install new toilet partitions n) *Replace existing Floor Drains Finishes: 1) Wall Tile – TeckArt Grass Cloth, Color: Taupe 2) Floor Tile – American Olean, NE02, 12”x24”, Matte, PCT 3) Floor Tile – VCT in hallway 205 (color TBD) 4) Wall Grout – Mapei, Ultracolor Plus FA, “00 White” 5) Floor Grout – Mapei, Ultracolor Plus FA, “01 Alabaster” 6) Schluter - A Schluter Dilex-AHK must be installed for wall to floor transitions. 7) Schluter – Where needed a transition strip should be installed for all new floors to existing floors 8) Door- Replace hardware with “like kind” & finish to match original 9) Paint – Benjamin Moore or Sherwin Williams a) Ceiling, and Walls – Flat white b) Door Frame (color TBD) Fixtures: Where applicable 1) Toilet a) Kohler Model K-84325 (Wall Mounted toilet with sensor’ d flush valve) b) Bemis Model 1955CT (open front) black solid plastic seat c) Hydrotek Model HB-8000C or Sloan Model Solis 8186-0.5 flushometer 2) Sink a) Kohler Model K-2867 (wall hung) b) Faucet- Symmons Model S-20-2-G 3) Urinal – Koehler Model K-5016-ET. Wall Hung, set height per drawing, 17” or 24” AFF. 4) Baby Changing Station - Koala Kare® Horizontal Baby Changing Table - White Granite KB200-05 5) Lighting –Lithonia CPANL LED 2x4 flat panel fixture 6) Toilet Paper Dispenser – Sanmar R3500TBK 7) Sanitary Napkin Bin Bobrick B270 8) Wall Mirror (match original to what’s removed) 9) Toilet partitions- Mfg: Accurate Partitions Black #9205 10) Countertops – Corian with integral sink attached, hole for waste receptacle beneath (Solid Surface Linen) 11) Soap dispenser – GoJo Model 5155-06 Black 12) Electric Hand Dryer: World Dryer L-971 SLIMdri