1. ITS Field Cabinet HUB Site , Model# 332D, APL Cert# 676-035-022 2. Section 995-1.1 ID 1 - All equipment is permanently marked with manufacturer name or trademark, part number, and date of manufacture or serial number. 3. Section 995-11.1 ID 2 - Cabinet is permanently marked with a water-resistant label including the manufacturer's name or trademark, model/part number, and the year and month of manufacture on the inside of the main door. 4. Section 995-11.1 ID 3 - The water-resistant label is visible after installation. 5. Section 995-11.1 ID 4 - Need to meet the applicable requirements in Aluminum Cabinets, NEMA-TS-2. 6. Section 995-11.1 ID 5 - Cabinet is provided with a standard lock. 2 keys are provided for each cabinet. 7. Section 995-11.1.1 ID 6 - Cabinet doors are outfitted with an industrial standard pin tumbler lock with No. 2 key. 8. Section 995-11.5 ID 11 - Cabinet shell conforms to NEMA 3R requirements, is constructed of unpainted sheet aluminum alloy 5052-H32 with a minimum thickness of 0.125 inches and has a smooth, uniform natural aluminum finish without rivet holes, visible scratches, or gouges on the outer surface. 9. Section 955-11.5 ID 12 - Cabinet dimensions are: Type 332D – 66 to 68 inches high by 48 to 50 inches wide by 30 to 32 inches deep 10. Section 955-11.5 ID 13 - Cabinet is weather resistant and constructed with a crowned top to prevent standing water. 11. Section 955-11.5 ID 14 - All exterior cabinet welds are gas tungsten arc (TIG) welds and all interior cabinet welds are gas metal arc (MIG) or TIG welds. 12. Section 955-11.5 ID 15 - All exterior cabinet and door seams are continuously welded and smooth and all inside and outside edges of the cabinet are free of burrs, rounded and smoothed for safety. 13. Section 995-11.5 ID 16 - All welds are neatly formed and free of cracks, blow holes and other irregularities. 14. Section 995-11.5 ID 17 - All aluminum welding utilizes ER5356 aluminum alloy bare welding electrodes conforming to AWS A5.10 requirements. Procedures, welders, and welding operators conform to AWS requirements as contained in AWS B3.0 and C5.6 for aluminum. 15. Section 995-11.5 ID 18 - Cabinet has lifting eye plates mounted on both sides of the top of cabinet for lifting and positioning it. 16. Section 995-11.5 ID 19 - Each lifting eye is secured with a minimum of two bolts to the cabinet body and have an opening diameter of 0.75 inches capable of supporting a weight load of 1,000 pounds 17. Section 995-11.5 ID 20 - All external bolt heads are tamperproof. 18. Section 995-11.5 ID 21 - Ground-mount cabinets include a removable base plate and two aluminum plates, welded inside, for anchoring the cabinet.
