The City of Ocala requires the services of an experienced Contractor to provide light construction services/goods supporting the Facilities department. The Contractor may be required to perform the following types of services for the City of Ocala. This list is not an attempt to exclusively define those specific activities the Contractor will perform. • Remove toilet and sink. Keep in a usable condition for re-installation after tile is installed. • Remove two water fountains. Reinstall one of the fountains in the main bay of the fire station next to an existing water fountain/bottle filler station. • Remove old wall tiles and floor tiles. • Replace damaged drywall from tile removal. Drywall construction shall be 5/8" gypsum board. The drywall shall be textured, primed, and painted with two coats to match existing walls in the area. • Remove the existing metal frame door to restroom. Keep in usable condition for reinstallation into a new location. • Frame out a 3’x4’ shower to expand the footprint of the current restroom. Use metal framing and a cement board with a waterproofing membrane. Install a niche into the shower wall for toiletries. • Install drainage and a shower pan with a standard 4-inch lip. • Install plumbing for the shower head as well as plumbing for the hot and cold water. • Frame out the new entry wall and install the previously removed steel door and frame. • Install new large format (size to be determined) wall tile from floor to ceiling in the shower and from floor to 4’ up onto the walls in the main area of the restroom. Use tile trim on all exposed tile edges. • Install new, small format tile or mosaic style tile in the shower pan and restroom floor. Use tile trim on all exposed tile edges. • Relocate/add ceiling light fixtures and switches. • In the existing restroom area, redesign the existing ceiling grid tiles in order to relocate HVAC grills/registers to provide adequate airflow to the restroom. • In the new shower addition, replace all grid style roof tiles with a green board moisture resistant drywall. Finish and paint to match existing wall/roof colors. • All work completed on this project must pass final building, electrical, plumbing, and mechanical inspections.
