Specifications include, but are not limited to: The successful bidder shall furnish material, tools, machinery, equipment, supplies, labor, and supervision necessary to remove and replace twenty-eight (28) concourse loading bridge, hollow metal doors, as specified herein. All workers must be skilled in the tasks assigned to them. Metal doors shall meet or exceed all industry and safety standards as well as the following salient characteristics: 1. Doors shall be hollow metal doors (HMD) and shall be minimum twelve (12) gauge galvanized steel, with H14 3670 galvanized steel-stiffened core, meeting the following salient characteristic: • B14-4 A60 galvanized 3’6 x 7’0 x 1¾ V welded edge, EPT, continuous hinge, DP, Clos, Mort Lox Raceway, STC, CL standard ¾” under cut. Hardware shall be included, and shall be as follows: 1a. Hinges, continuous, (28), shall be Ives 224HD 83” EPT TEK, or equal. 1b. Electrified rim exit device (28), shall be Von Duprin RX 99L X E996L-R&V 03 48”, or equal. 1c. Interchangeable core rim cylinders (28), shall be Corbin 3080-178-6 CT6R, or equal. 1d. Extra duty arm door closures (28), shall be LCN 4040XP EDA, or equal. 1e. Electrical power transfers (28), shall be Von Duprin EPT-10, or equal. 1f. Steel door contacts (28), shall be DPS 1076D-M, or equal. 1g. Adhesive-backed fire/smoke bulb gasket (28), shall be Pempko S88D 21, or equal. 1h. Aluminum vinyl perimeter seals, 1 x 36 / 2 x 84, (shall be compatible with arm closures), shall be NGP 704EVDKB, or equal. 1i. Kickplates (28), shall be 12” x 40”. 2. Door frames shall include two (2) mudboxes, one (1) mudbox to facilitate the EPT, and one (1) mudbox to facilitate the door position switch. Frames shall be hollow metal frames (HMF) and shall be minimum twelve (12) gauge, galvanized steel, meeting the following salient characteristics: a. F14-4 A60 galvanized 3’6 x 7’0 x 5¾ welded EPT, continuous hinge, DP, Clos, ASA, P&D, and prepped for specified hardware in HW Set #1. b. Rock wool shall be used in frame jambs for sound deadening