1 PC Extended Warranty It covers the cost of repairing or replacing major component when out of service. Includes: 1. Blower Core High efficiency impeller, Permanent magnet synchronous motor, Bump-foil air bearings, Diffuser fan, Motor casing 2. Variable Speed Drive/Inverter 3. Input Line Reactor 4. Sine-wave (sinus) filter 5. Blower Local Control Panel and PLC components 6. HMI Touch Screen components 7. Internal vibration and absorption mounts 8. Vibration sensors and monitoring 9. Discharge Expander (discharge cone) 10. Blow off by-pass valve and solenoid parts 11. Blow off silencer 12. Sound attenuating inside enclosure 13. Check valve seals and discs 14. Stop valve body seals and discs 15. External expansion joint II. Remote Monitoring System and support as permitted by the customer. III. The Extended Preventive Routine Maintenance (EPRM). o One (1) on-site maintenance and inspection visit by a manufacturer’s Field Service technician. o Refresher training. o Inspect and clean/replace the air intake filters (inside the turbo blower). o Inspect and clean dirt and debris in enclosure, seal as required. o Bump start alignment of the core bearings and check health for continued operation. o Ensure PLC and HMI software is operational and suitable for the blower control. o Inspect for loose connections and tighten them as required. o Verify sensors functionality and replace them as required. o Inspect control parameters and adjust to adapt to the operating environment. o Inspect paint and fasteners and apply touch-up or replacement as required. Touch-up does not apply to areas larger than a quarter Dollar coin size. Additionally, this plan includes: o After Hours Remote Technical Support (by telephone), as required. Response time within 1 hour Up to 150 hours of technical support o Reporting on operation and diagnostics of operating units, when available for remote monitoring. o 10% discount on spare parts and air filters for duration of the Asset Management and Service Plan.
