Specifications include, but are not limited to: MAIN AREA1.Remove wood trim2.Recess electrical conduit (existing) against block wall 3.Install 5/8” sheetrock over existing paneling with orange peel textured finish and paint4.Install ¼” bead board wainscot over finished drywall with cap molding 40” from floor (natural stain finish)5.Install acoustical ceiling at appropriate height using specified material6.Remove ceiling fans and replace lights with LED light fixtures7.Make necessary modifications and trim existing doors accordingly8.Repaint bathrooms on south end of bldg.9.Replace doors going into kitchen and bathrooms10.Replace door to storage room11.Install additional outlets on south end of bldg. (2) 12.Install 4” vinyl cove baseSTAGE AREA 1.Remove existing texture on ceiling, repair and repaint.2.If possible, construct false beam at transition3.Install and finish drywall over paneling 4.Remove existing paneling on stage front and replace with new wainscot material5.Hall bathroom; remove existing fixtures and repair floor and paint with specified floor paint6.Replace flooring with specified floor covering 7.Replace existing light fixture with new LED fixtureKITCHEN1.Replace cabinets and counter tops with solid wood product2.Replace flooring with specified product3.Repair and paint walls and ceiling4.Replace door from stage end (slab only)5.Replace light fixtures with LED fixtures6.Remove existing shelving