Generally, the Design-Builder’s responsibilities shall include, but will not be limited to, the following: a) To confirm the design and construction of the Project in accordance with the RFP Documents, including all applicable attachments. b) To provide all design, construction, and construction management services necessary to implement the goals of the Project inclusive of, but not limited to, the following: (i) civil, architectural, electrical, structural, low voltage, and mechanical design services as required for the Project; and (ii) construction management services inclusive of budgeting, value engineering (“Value Engineering”), scheduling, Project phasing, Project administration, management, and coordination of subcontractors. Design scope shall also include full design and specifications, with a minimum of two options for basis-ofdesign for each, of the FF&E for GMP pricing. c) To conduct existing building and site investigation work, including archeology, if and as required for the Project. d) To furnish and provide all materials, management, personnel, equipment, hazardous material abatement, supervision, labor and other services necessary to complete the Project. e) To provide the necessary design, consultants and documentation for all permitting, zoning, historic preservation, US Commission of Fine Arts approvals and National Capital Planning Commissioning, as needed. f) To provide move coordination and logistics support for the Project.