1. GENERAL DESCRIPTION - Acquisition of modular panels, manufactured in aluminum alloy, intended for the formation of high-resistance temporary flooring, for use on uneven terrain or with low support capacity (sand, wet soils, etc. ), remote environments and operations requiring rapid installation, such as military, logistical and emergency activities. 2. REQUIRED SPECIFICATIONS a) Material: high strength aluminum alloy; b) Approximate panel dimensions: 1 ) length: 3000 mm; 2 ) width: from 500 to 1,200 mm; and 3 ) maximum thickness: 50 mm. c) Unit weight: maximum of 110 kg, proportional to the width of the quoted product; d) Maximum static load supported: minimum of 90 (ninety) tons per square meter (on compacted earth soil ); e) Axle load capacity: approximately 12.5 tons; f) Operating temperature: -20° C to +60° C; g) Possible surfaces for use: grass, sand, soil, gravel, asphalt and concrete; h) UV stability: high resistance to degradation by sunlight; i) Corrosion resistance: do not corrode under standard environmental exposure; j) Flame resistance: non-combustible material; k) slope : supports slopes and uneven terrain of 30% lateral and 15% transverse;...
