Specifications include, but are not limited to: A. Electrical The Contractor shall provide Electrical services to include miscellaneous repair of electrical systems and new construction work. All electrical equipment including service equipment, power distribution switchgears and panel boards, protective devices, transformers, feeders and branch circuit wiring, raceways, motors, motor circuits, motor controllers and motor control centers, electronic equipment and wiring, lighting systems, emergency power and lighting systems, wiring devices, portable tools and equipment and other types of utilization equipment shall be maintained free of hazards to life and property in an efficient, operational and usable condition. All electrical equipment, components and associated devices shall be free of defects and always maintained with a pleasing appearance. All workmanship and materials shall conform to the National Fire Protection Association (NFPA) Code and National Electric Code (NEC). B. Mechanical and Plumbing The Contractor shall provide Mechanical and Plumbing services to include, but not limited to: maintenance, new and renovations construction and repair of mechanical and plumbing systems including: sanitary sewage ejection equipment and systems, steam supply service, heating water, HVAC units, cooling towers, VAV’s, and thermostats. Typical work activity includes, but is not limited to: the installation and repairs of toilets, urinals, underground excavation, underground sewer lines, domestic supply mains, drinking fountains, sinks, pumps, valves, controls, water heaters, circulating pumps and motors, expansion tanks, backflow preventers, strainers, various types of valves, regulators, compressors, electronic controls, various gauges, various sensors, various safety devices, headers, manifolds, bearings, belts, pulleys and motors and mechanical drives, testing and balancing, conveyors, belt changes, equipment lubrication and all related components. C. Painting The Contractor shall provide Painting shall include, but is not limited to, both the interior and exterior of all types of surfaces on buildings and miscellaneous structures as well as the painting of other miscellaneous items such as signs, guard posts, rails, parking bumpers and spots, road markings, curbs and crosswalks, etc. D. General Construction The Contractor shall provide General Construction services to include miscellaneous repairs of walls, ceilings, flooring, tile, surfaces, etc. Services also includes new construction activities of these elements in addition to small space updating and reconfiguration. All general construction activities shall be constructed as per applicable codes and per manufacturers installation instructions. E. Concrete and Masonry Services The Contractor shall provide concrete and masonry services including, but not limited to: sidewalks, dumpster pads, curbs and gutters, retaining walls, brick pavers, block repair, power washing, asphalt repair, tiling, plastering and trench drains. F. Other Auxiliary Maintenance Services/Unskilled Labor The Contractor shall provide other auxiliary maintenance services including, but not limited to: fencing (including wrought iron), flooring glass and glazing. The Contractors shall provide labor services and any related supplies to perform work that requires little to no experience to accomplish but is critical to the completion of a project or task. These assignments could include but are not limited to, hand shoveling of snow and ice, hand application of ice melt, pickup and disposal of yard waste and trash, sweeping of floors, and moving furniture or equipment (50lbs+).
