Specifications include, but are not limited to: •Soda blast to commercial quality for added corrosion protection the boat’s outer hull, deck, rails, work platform, cabin exterior and cockpit (cabin interior). •Apply primer on the boat’s outer hull, deck, rails, work platform, cabin exterior and cockpit (cabin interior).•Paint the boat’s outer hull, deck, rails, work platform and cockpit (cabin interior) with two (2) part blue gray, or comparable color, epoxy enamel.•Paint the boat’s cabin exterior with two (2) part white epoxy enamel.•Install non-skid panels on all walking areas, including interior and exterior floors, deck, roof and rails.•Remove existing rubber fenders and replace with new rubber fenders. •Install new vinyl lettering on hull sides as per existing lettering. •Troubleshoot and perform repair to docking lights, 12-volt plug, seat wiring and windshield wipers. •Weld and repair hull gouges. •Seal off ball check sea chest.